1. Post #1
    Breny's Avatar
    September 2009
    541 Posts
    **THIS THREAD WILL CONTAIN A LOT OF IMAGES, BE WARNED**

    This may have been done before, but I don't really care.
    Request a model here, and I'll give it my best shot.. if it's too hard for me, It'll still be done but it will take significantly longer as I'll be searching for a way to make it.

    I'm a rookie modeller, so I can't do everything.

    Images of the (at least I think they are) best models I've done so far:


    A chicken model, it's a ragdoll ('Ragdolled' by my friend)


    A simple treasure map model


    A battleaxe model, the high poly & baking was done by my friend (I owe him a lot for the help he gives me)

    So, that's about it then. Go ahead and request stuff, I'm out of ideas myself and I want to practice & improve.
    Thanks in advance.


    --Released models--

    CD model
    MRE model
    Ford logo model
    Reply With Quote Edit / Delete Reply Windows 7 Belgium Show Events Friendly Friendly x 2Funny Funny x 2Artistic Artistic x 1 (list)

  2. Post #2
    Gold Member
    Treevis121's Avatar
    November 2008
    441 Posts
    Can you make a shield to go along with the axe? That'd be nice; the models look good, keep at it!

  3. Post #3
    Breny's Avatar
    September 2009
    541 Posts
    Sure can, I'll start on it right away.

    Meet the low poly shield, heavy WIP.. slapped on a texture to show you what I'm aiming for:

    Reply With Quote Edit / Delete Reply Windows 7 Belgium Show Events Artistic Artistic x 1 (list)

  4. Post #4
    Gold Member
    Treevis121's Avatar
    November 2008
    441 Posts
    Lookin' good! Have you thought about applying a bevel to the shield?

  5. Post #5
    Breny's Avatar
    September 2009
    541 Posts
    There is one, but perhaps it's not really visible from the angles I posted.
    I'll try to make it a bit bigger so that it's more noticeable, but for now I'm going to get some sleep.

  6. Post #6
    Better Than Jacknife
    Minimole's Avatar
    December 2009
    8,908 Posts
    Could you try making a ps3 box?

  7. Post #7
    Breny's Avatar
    September 2009
    541 Posts
    Alright, started adding details to the shield as well as making the ps3 box.
    The ps3 box doesn't look that hard, so it'll be done rather quickly.

  8. Post #8

    June 2010
    241 Posts
    Cool, I love your stuff!

    I want to request Wart from SMB2, but I don't mind if it takes longer to model.

    Reply With Quote Edit / Delete Reply Windows 7 Finland Show Events Agree Agree x 1 (list)

  9. Post #9
    Breny's Avatar
    September 2009
    541 Posts

    As you can see, the ps3 box model wasn't hard. The hardest part is finding the right textures for it..
    So far I've only found a (rather poor quality) texture of the box's back, and that's after over 25 minutes of searching.

    Cool, I love your stuff!

    I want to request Wart from SMB2, but I don't mind if it takes longer to model.

    *image*
    Is there a pc game I could port him from?
    Reply With Quote Edit / Delete Reply Windows 7 Belgium Show Events Winner Winner x 1 (list)

  10. Post #10

    June 2010
    241 Posts
    Is there a pc game I could port him from?
    I think there's a model made for Mario Kart: Source, but since I think it is private, it's not possible.

  11. Post #11
    Gold Member
    Cone's Avatar
    August 2011
    18,981 Posts
    Can you work your magic charms into a police badge, please?

  12. Post #12
    Breny's Avatar
    September 2009
    541 Posts
    What style would you like?
    a- (SEE BELOW)
    b-

    Edit: Figured I'd do both for extra practice. A is first, WIP image:

  13. Post #13
    Just a Homestuck OC with a massive dick
    Irockz's Avatar
    April 2011
    2,509 Posts
    how about a packet of refreshers?

    And an open version, with each colour of refresher:

  14. Post #14
    Blitzkrieg Zero's Avatar
    August 2011
    2,684 Posts
    How many models can we request at once? I don't want to request more than you can handle.

  15. Post #15
    Breny's Avatar
    September 2009
    541 Posts
    Well, at the moment I have these things to do:
    -Detail the shield more (Not needed, but I want to. Will do this last)
    -Texture the ps3 box (Can't find any so that's on hold for now, untill I find some or somebody finds some for me :p)
    -Texture the badge
    -Make a refreshers model

    It's a lot to do, but I'm happy to have a list. This way I'll keep myself busy and improve at modelling.
    (Also, updated the image of the badge. Final version)

  16. Post #16
    Just a Homestuck OC with a massive dick
    Irockz's Avatar
    April 2011
    2,509 Posts
    The badge is going good. Are you already on texturing?

  17. Post #17
    RidleySmash's Avatar
    December 2011
    404 Posts
    Can you make king Arthur's mighty crown?

    and possibly his shield?
    Reply With Quote Edit / Delete Reply Windows 7 United States Show Events Winner Winner x 1 (list)

  18. Post #18
    Breny's Avatar
    September 2009
    541 Posts
    The badge is going good. Are you already on texturing?
    Yep, here is the model with AO:

  19. Post #19
    Just a Homestuck OC with a massive dick
    Irockz's Avatar
    April 2011
    2,509 Posts
    Yep, here is the model with AO:
    Looks like it's almost done. Will you be adding some phong though to make it look like smooth metal? By the way, I know I'm over-requesting, but could I request that

    a pocket sized refresher pack is included with an opened version of that?

  20. Post #20
    adamsz's Avatar
    May 2010
    204 Posts
    how about an AT-AT box and model?

    http://imgur.com/n8f0S

  21. Post #21
    Breny's Avatar
    September 2009
    541 Posts
    Sure thing, but now I'm going to bed :P
    I'll be working on these this weekend, expect a lot of progress :)

    how about an AT-AT box and model?

    http://imgur.com/n8f0S
    Seems like a challenge, I'll give it a shot.

  22. Post #22
    Reply With Quote Edit / Delete Reply Windows 7 United States Show Events Dumb Dumb x 1 (list)

  23. Post #23
    Nyllsor's Avatar
    May 2011
    155 Posts
    Please make US Military MRE packages! A MRE carboard supply box would be a nice extra too :)
    If you don't know what MRE is, or looking for referance: http://www.mreinfo.com/
    Really nice models btw :)

  24. Post #24
    Blitzkrieg Zero's Avatar
    August 2011
    2,684 Posts
    I'd like to request military goggles (with a ragdolled strap, if possible):


    And dogtags (Again, preferably with a ragdolled chain):

  25. Post #25
    Breny's Avatar
    September 2009
    541 Posts
    Please make US Military MRE packages! A MRE carboard supply box would be a nice extra too :)
    If you don't know what MRE is, or looking for referance: http://www.mreinfo.com/
    Really nice models btw :)
    Added them to my list.

    I'd like to request military goggles (with a ragdolled strap, if possible):
    And dogtags (Again, preferably with a ragdolled chain):
    I'm not really good at ragdolls, but I'll try :)
    Reply With Quote Edit / Delete Reply Windows 7 Belgium Show Events Winner Winner x 1 (list)

  26. Post #26

    September 2011
    721 Posts
    I need some help here its not soo much a model request but modifying a current model/prop

    http://www.garrysmod.org/downloads/?a=view&id=87281
    The Left 4 Dead 2 armored Van near the canon in this picture
    Could you maybe remove the doors and turn them into props as well as makeing a doorless version of the van ?

    I need it for a movie im working on and it would definetly make some shtos easier if i could open up the doors of the van

  27. Post #27
    Breny's Avatar
    September 2009
    541 Posts
    I need some help here its not soo much a model request but modifying a current model/prop

    http://www.garrysmod.org/downloads/?a=view&id=87281
    The Left 4 Dead 2 armored Van near the canon in this picture
    Could you maybe remove the doors and turn them into props as well as makeing a doorless version of the van ?

    I need it for a movie im working on and it would definetly make some shtos easier if i could open up the doors of the van
    Only if I get permission from the person who ported them. I know he's not actually the maker of the models, but I'd still rather not edit a prop without permission.

  28. Post #28

    September 2011
    721 Posts
    Only if I get permission from the person who ported them. I know he's not actually the maker of the models, but I'd still rather no edit a prop without permission.
    Well i like to think that if he put it out there and theres no message saying do not modify or change etc i dont think he would really mind . I mean people change alot of the models for like personal skins n such all the time .
    Dont really think you gotta ask him unless he says you need permission

  29. Post #29
    Gold Member
    VenomousBeetle's Avatar
    January 2010
    6,209 Posts
    They have 0 right to say you can't, it's hardly "porting" at all

  30. Post #30
    l4d2's Avatar
    December 2010
    169 Posts

    A model of contact for RP.

  31. Post #31
    Ask me about my Marvel/DC fetish
    AaronM202's Avatar
    May 2010
    17,990 Posts
    Alright good sir.

    I request...








    The 1966 Adam West Batmobile.

    Edited:

    Heres other various pics, but you cant get the model unless you wanna pay up a good 400 dollars.

    http://www.turbosquid.com/3d-models/...4-model/624663
    Reply With Quote Edit / Delete Reply Windows 7 Canada Show Events Dumb Dumb x 1Funny Funny x 1 (list)

  32. Post #32
    Breny's Avatar
    September 2009
    541 Posts
    I'm nowhere near good enough to make a car, sorry. (Although I will try :p)

  33. Post #33
    Ask me about my Marvel/DC fetish
    AaronM202's Avatar
    May 2010
    17,990 Posts
    I'm nowhere near good enough to make a car, sorry. (Although I will try :p)
    I'd recommend trying to use pieces from other models to make it look better.

  34. Post #34
    Breny's Avatar
    September 2009
    541 Posts
    I'm sorry, I don't do that.
    Only if I get permission from the person who ported them. I know he's not actually the maker of the models, but I'd still rather not edit a prop without permission.

  35. Post #35
    Gold Member
    Exorade's Avatar
    October 2006
    5,329 Posts
    How about a modern telescopic baton?

    The one in garrysmod.org looks pretty horrible.



    Size reference
    Reply With Quote Edit / Delete Reply Windows 7 Finland Show Events Agree Agree x 1 (list)

  36. Post #36
    Gold Member
    Cone's Avatar
    August 2011
    18,981 Posts
    How about a modern telescopic baton?

    The one in garrysmod.org looks pretty horrible.



    Size reference
    It shall go nicely with the badge

    Hooray for police brutality
    Reply With Quote Edit / Delete Reply Windows 7 United Kingdom Show Events Funny Funny x 2 (list)

  37. Post #37

    September 2011
    721 Posts
    I'm sorry, I don't do that.
    Also i forgot to ask...what if said person never replys ?

  38. Post #38
    Moose's Avatar
    January 2010
    3,066 Posts
    can you make a beluga whale

  39. Post #39
    Blitzkrieg Zero's Avatar
    August 2011
    2,684 Posts
    I'm not really good at ragdolls, but I'll try :)
    If you can't get it ragdolled, I'll just take a prop of them. Thanks, by the way.

  40. Post #40
    DoubleMatt's Avatar
    July 2011
    325 Posts
    Issac clarke in the advanced suit with no helmet these ragdolls should help http://www.garrysmod.org/downloads/?a=view&id=118220 http://www.garrysmod.org/downloads/?a=view&id=119882
    Reply With Quote Edit / Delete Reply Windows 7 Canada Show Events Dumb Dumb x 1Disagree Disagree x 1 (list)