Register
Events
Popular
More
Post #481
The echo 1 is this hybrid between the a2 and a1
Edited:
No moist nugget, that is a museum piece not the soviet club it should be.
-
-
Just looked at that one, the G&P one is quite nice, full metal too.
Edited:
I don't intend to go into games with these. I just like to collect them, and in some cases they're cheaper than replicas or the real ones.
-
CYMA is good. If they're going to be wallhangers, go with Dboys AK's. They have nicer exteriors.
-
For an accurate A1, you want the G&P then.
If you want an mosin, get a real one lol they're like $100?
-
The only Dboy AK i can find is a 74.
Edited:
Well I did say some cases, and frankly I'd rather not go through the process of filling out a license and all that jazz for a real gun. Maybe in a few years, but right now this is what I'll probably do.
-
im going to order a desert marpat uniform, new knee pads (they got fucked up last game i went to) im also going to get a m16a4 for my USMC loadout, any reccomendations of what m16 i should get?
-
Just ordered a ton of shit, so I need to stop, but next purchase...
Knee Pads (OE Tech Releasable)
New Smart Charger
Shemagh
Mechanix Wear M-Pact Gloves
VFC VLight Flashlight
Short Rail for my MOE Handguard
and MAYBE:
G&P 614 Fix Stock (TAN) ( I have so much money in large battery packs it would cost less for a stock that fits them and a small to large adapter than buy the equivalent in nunchucks.
-
hint:
use ebay for marpat
-
I personally like the Combat machine M4 as my base for my M16A4, but you pretty much have to buy a new outer/inner barrel, front sight and RIS for it.
Look for a generic M16 w/ a RS delta ring that you like then order a Dboys M16 RIS from ASGI.
-
Doesn't Dboys sell an M16A4 with RIS?
-
Hasn't been restocked in a long time from what I recall.
http://www.airsoftgi.com/product_inf...oducts_id=5578
-
G&G makes an M16A4.
-
It came back into stock like last month and sold out in a week. They're pretty popular.
Edited:
Also I don't think there are any A4 models on the market with actual 3-Round Burst. If you want that all you really have to do is buy a burst-wizard.
-
Or a good programmable MOSFET unit.
-
But MOSFET's are a bit harder to install than a Burst Wizard. Burst Wizards are temporary and painless.
-
What's a burst wizard?
-
Shitty review but meh
Edited:
I should put one on my Type 89 which already has a mechanical 3-Round Burst.
Yo dawg I heard you like three-round burst, so we put a three-round burst on your three-round burst so you can three-round burst while you three-round burst.
-
Looks neat but there's a delay between the trigger pull and the actual gun firing
Edited:
Is it the quality of the video?
-
Dunno, but I rather get a delay in firing than having to go to the trouble of setting up an actual MOSFET unit.
-
Looked up the mosfet but isn't it just cutting the wires and sodering it back on
Edited:
I'm no electrical technician but that seems rather easy with the right tools
-
Yeah, which means you have to take things apart and do electrical work. Someone at my field put a MOSFET in his Systema and fucked it up too. I remember watching him and the Tech bullshitting about it when he showed him and getting all technical.
-
So wait what you just cut wires and put it in different places and somehow you fuck up the gun? :confused:
-
I didn't. I don't remember what the problem was just that it was a giant headache and the tech had to take it home to work on it.
-
Looks like I'll buy one. Might as well make my M16A4 as accurate as possible. Plus it will save me from killing anymore lipos.
Now if there was only a smaller version that would fit in my buffer tube setups. Maybe I might be able to hide it in the ACS stock in either the battery storage or lower compartment, then dremel a hole through the stock to attach the wires.
-
What the christ I can't find the normal ribbed M16a2 handguards because I kinda snapped mine and it has a small crack and I want to get it replaced asap
All I get are goddamn RIS handguards and fagpul shit
-
-
-
Barely any savings. Not to mention he has to do internal work he may not want or be willing to do.
If he wanted to save a lot of money he should get an LED Magazine or something. Tracers are still better though because they flash the BB's at the very last second before they leave the barrel.
-
I'm probably getting a Kobra when I make my Russian loadout because I'm probably going to have more than enough money left over by the time I actually buy the gun and all the gear.
-
Where do you live that makes you fill out a license to buy guns? In Ohio I just need to fill out paperwork.
-
He lives in California.
-
Most places that aren't America require a firearms license. You probably need one in Commiefornia too.
Edited:
Fucking ninja'd
-
The v3 of this thread needs to be Soviet related.
-
I'd rather go through the whole process and save me about $500 and get me a real nugget as well
http://m.wikihow.com/Buy-Firearms-in-California
Not too hard either
Edited:
Aaaaohgod I just noticed you was looking at the ugly-ass zeta lab one
-
California is the only gun nazi state.
I hate it.
-
That is why i'm moving to Nevada or Alaska when im older.
-
or texas with me
-
Can we bring airsoft aesthetic silencers into Canada? I know real ones are illegal so it might cause a problem...
-
Yeah Texas would be cool too, im a country boy so i would probably fit right in.
-
i live right outside of san antonio, as in like 500 meters from city limits.
Funny x 1
Informative x 2
Agree x 1
Disagree x 1
