1. Post #601
    Taepodong-2's Avatar
    December 2009
    13,165 Posts
    What's a good starter camo fatigue to get, and what gear should I get for my first big game?
    Flecktarn and M81 are probably the cheapest camo patterns you can buy. A good cheap chest rig would be a Condor chest rig like this.
    http://www.airsoftgi.com/product_inf...oducts_id=7090
    Reply With Quote Edit / Delete Canada Show Events Agree Agree x 1 (list)

  2. Post #602
    Jherkin Gherkin
    Dennab
    October 2010
    12,198 Posts
    What's a good starter camo fatigue to get, and what gear should I get for my first big game?
    woodland or whatever you prefer
    if its 'big', get a plate carrier and alot of mags + poucehs
    Reply With Quote Edit / Delete United States Show Events

  3. Post #603
    ಥ益ಥ ... Beautiful.
    Kill001's Avatar
    April 2006
    11,887 Posts
    PLCE comes with the following:

    2XDOUBLE AMMUNITION POUCHES
    1XCANTEEN POUCHES
    1XUTILITY POUCH
    1X HIP BELT (gives webbing better & comfortable fitting)
    1X YOKE
    1X BELT
    1 X HEXYBURNER(Cooking stove with hexamine blocks)
    1 X 58 PATTERN WATER BOTTLE
    2 X MESS TINS
    1 X TOWEL
    1 X TALC POWDER(for drying feet)
    1 X SUNSCREEN(preventing sunburn)
    1 x CAMOFLUAGECREAM
    1 X RIFLE SLING(5.56mm SA80)
    1 X WEAPONSCLEANING KIT BAG
    1 X FIRST FIELDDRESSING
    1 X SCRIM NET(wrap around & stop rattling of mess tins and burner)
    1 X SANDBAG(Gash bag,collect spent rounds,etc)
    Was it worth $96 (it's a real one by the way)
    Reply With Quote Edit / Delete United States Show Events

  4. Post #604
    Gold Member
    Stupideye's Avatar
    October 2006
    12,424 Posts
    What's a good starter camo fatigue to get, and what gear should I get for my first big game?
    I have a old vest you could probably borrow if you are coming out to a Lowshots game. Camo-wise I'd go with M81 since it's cheap and readily available.
    Reply With Quote Edit / Delete Canada Show Events

  5. Post #605
    POOP DICKS
    Dark Descent's Avatar
    August 2008
    4,895 Posts
    M81 or flecktarn. Due to sheer availability.
    Reply With Quote Edit / Delete United States Show Events

  6. Post #606
    PAST TENSE DIG
    deathmog's Avatar
    October 2007
    7,614 Posts
    PLCE comes with the following:



    Was it worth $96 (it's a real one by the way)
    Where'd you get all of this?
    Reply With Quote Edit / Delete United States Show Events

  7. Post #607
    Gold Member
    hgncommand's Avatar
    June 2009
    2,126 Posts
    I have a old vest you could probably borrow if you are coming out to a Lowshots game. Camo-wise I'd go with M81 since it's cheap and readily available.
    That would be lovely if I don't manage to get one off a friend of mine, by the way, I am planning on coming to scavenger avenger.
    Reply With Quote Edit / Delete Canada Show Events

  8. Post #608
    Gold Member
    Stupideye's Avatar
    October 2006
    12,424 Posts
    That would be lovely if I don't manage to get one off a friend of mine, by the way, I am planning on coming to scavenger avenger.
    Awesome. I have some other assorted gear shit too so if you need anything, just ask.
    Reply With Quote Edit / Delete Canada Show Events

  9. Post #609
    ಥ益ಥ ... Beautiful.
    Kill001's Avatar
    April 2006
    11,887 Posts
    Where'd you get all of this?
    Ebay


    He was selling fucking everything
    Reply With Quote Edit / Delete United States Show Events

  10. Post #610
    PAST TENSE DIG
    deathmog's Avatar
    October 2007
    7,614 Posts
    Ebay


    He was selling fucking everything
    Is that the guy with the full set for like 70 bucks with the pistol holster?
    Reply With Quote Edit / Delete United States Show Events

  11. Post #611
    ಥ益ಥ ... Beautiful.
    Kill001's Avatar
    April 2006
    11,887 Posts
    It was an auction and there was only one bidder and I sniped his bid at the last 3 minutes (I waited 6 days to do that)

    Starting bid was 55 gbp and I won it with 56.99 gbp

    Edited:

    Is that the guy with the full set for like 70 bucks with the pistol holster?
    Nope, no pistol holster and starting bid was a bit more
    Reply With Quote Edit / Delete United States Show Events Winner Winner x 1 (list)

  12. Post #612
    Gold Member
    Dierag's Avatar
    December 2007
    1,250 Posts
    I am going to buy this during summer or Gas Ak
    Reply With Quote Edit / Delete United Kingdom Show Events Late Late x 1 (list)

  13. Post #613
    Gold Member
    xXEnder007Xx's Avatar
    July 2006
    3,757 Posts
    Guarder MBK for my TM P226. My SIG is dead until I get a new slide.


    Seems like buying an EBR is becoming a more distant dream.
    Reply With Quote Edit / Delete United States Show Events

  14. Post #614
    Identity's Avatar
    August 2009
    6,180 Posts
    Guarder MBK for my TM P226. My SIG is dead until I get a new slide.


    Seems like buying an EBR is becoming a more distant dream.
    I'm curious about that. How exactly did it snap?
    Reply With Quote Edit / Delete United States Show Events

  15. Post #615
    Gold Member
    xXEnder007Xx's Avatar
    July 2006
    3,757 Posts
    Reply With Quote Edit / Delete United States Show Events

  16. Post #616
    Deathwig's Avatar
    April 2009
    1,235 Posts
    Holy crap ender o_0
    Any idea how the hell that happened?
    Reply With Quote Edit / Delete United Kingdom Show Events

  17. Post #617
    NEO 卐 NAZI HERO <3
    Inafinus :3's Avatar
    September 2009
    3,875 Posts
    He uses it loads so my guess is that its just broken after lots of use
    Reply With Quote Edit / Delete United Kingdom Show Events

  18. Post #618
    Identity's Avatar
    August 2009
    6,180 Posts
    Jesus. I wasn't expecting it to be that bad. I was thinking a hairline fracture.
    Reply With Quote Edit / Delete United States Show Events

  19. Post #619
    Gold Member
    xXEnder007Xx's Avatar
    July 2006
    3,757 Posts
    I think I fell on it when I took fire and went prone. Had to do some serious rolling to get to a safe spot. The Sig was in my chest rig mag pouch (didn't have the SEPRA, it was on my plate carrier).

    Let this be a warning to any of you who store pistols in mag pouches up front. Get a good holster for it.
    Reply With Quote Edit / Delete United States Show Events

  20. Post #620
    Identity's Avatar
    August 2009
    6,180 Posts
    I think I fell on it when I took fire and went prone. Had to do some serious rolling to get to a safe spot. The Sig was in my chest rig mag pouch (didn't have the SEPRA, it was on my plate carrier).

    Let this be a warning to any of you who store pistols in mag pouches up front. Get a good holster for it.
    Couldn't you CNC a custom slide for it?
    Reply With Quote Edit / Delete United States Show Events

  21. Post #621
    Gold Member
    xXEnder007Xx's Avatar
    July 2006
    3,757 Posts
    Does it look like I have access to a 4 axis CNC machine? No less know how to program it?

    CNC machining isn't as easy as you all think it is. First you got the make the model, which is going to be hard enough to make 100% accurate. Then you have to program toolpaths, which takes a long for more complicated parts. Then you have to set up the machine and all its tools, assuming you have access to them. Then wait sometimes hours for a machine to finish cutting, and even then it may need some tweaking to get the dimensions dialed in.

    I don't even do the programming or setup on the CNC's at work.

    If you were to send this out and have it CNC'd you're talking probably on the order of $500-$1000 for a single part assuming you already have the model.

    This is why you buy aftermarket parts that are already available whenever you can. It's much cheaper.
    Reply With Quote Edit / Delete United States Show Events

  22. Post #622
    PAST TENSE DIG
    deathmog's Avatar
    October 2007
    7,614 Posts
    This is why 3D printers should be cheaper.
    Reply With Quote Edit / Delete United States Show Events

  23. Post #623
    child porn prodigy
    venom's Avatar
    April 2005
    15,115 Posts
    whoa coming off a bit hostile
    Reply With Quote Edit / Delete Canada Show Events

  24. Post #624
    Gold Member
    Stupideye's Avatar
    October 2006
    12,424 Posts
    whoa coming off a bit hostile
    SHUT THE FUCK UP CNC MACHINING IS SERIOUs BUSINESS
    Reply With Quote Edit / Delete Canada Show Events Funny Funny x 2Agree Agree x 1 (list)

  25. Post #625
    Gold Member
    Safari's Avatar
    September 2007
    272 Posts
    SHUT THE FUCK UP CNC MACHINING IS SERIOUs BUSINESS
    A CNC machine killed my father
    Reply With Quote Edit / Delete United States Show Events Agree Agree x 5Funny Funny x 1 (list)

  26. Post #626
    GOSH FUDGING DARNIT
    Fish Muffin's Avatar
    January 2008
    7,325 Posts
    oh no way mine too
    Reply With Quote Edit / Delete United States Show Events Informative Informative x 2 (list)

  27. Post #627
    Oh no, what have I done!
    milkandcooki's Avatar
    November 2007
    21,327 Posts
    one time i saw a cnc machine

    it was gay
    Reply With Quote Edit / Delete United States Show Events

  28. Post #628
    child porn prodigy
    venom's Avatar
    April 2005
    15,115 Posts
    a cnc machine made my father
    Reply With Quote Edit / Delete Canada Show Events

  29. Post #629
    Gold Member
    Stupideye's Avatar
    October 2006
    12,424 Posts
    I am a cnc machine

    Edited:

    oh shit that reminded me of this
    Reply With Quote Edit / Delete Canada Show Events Funny Funny x 1 (list)

  30. Post #630
    Gold Member
    xXEnder007Xx's Avatar
    July 2006
    3,757 Posts
    This is why 3D printers should be cheaper.
    3D printers don't have the accuracy of a CNC machine or an injection mold though. They're used mostly for proof of concept design work, not for mass production and everyday use parts. You're also limited to what materials you can use, most of them being plastics. Believe it or not 3D printing can be more expensive than CNC cutting a part. Some place near me was charging up to $30-$40 per cubic inch of material you used on the printer, which is insanely expensive.

    SHUT THE FUCK UP CNC MACHINING IS SERIOUs BUSINESS
    Some may think this is funny, but it really is serious business. There are so many factors and demands of the industry right now, but I won't go over them, probably melt your brains. Even I'm having a hard time figuring out what's going on.

    This is just an example of the crazy stuff that's being done these days. I don't even understand how anyone can program these things.


    Not trying to be hostile to you guys, just trying to educate you on these processes and how truly expensive they can be.
    Reply With Quote Edit / Delete United States Show Events

  31. Post #631
    Oh no, what have I done!
    milkandcooki's Avatar
    November 2007
    21,327 Posts
    Looks like a porn.
    Reply With Quote Edit / Delete United States Show Events

  32. Post #632
    Gold Member
    Aznsniper911's Avatar
    July 2006
    2,766 Posts
    CNC Machining made this video very entertaining especially with the music.

    Very helpful information though.
    Reply With Quote Edit / Delete United States Show Events

  33. Post #633
    Gold Member
    wombo's Avatar
    October 2008
    2,546 Posts
    Welp I'm officially getting this:
    http://www.ebairsoft.com/romanian-la...ip-p-1004.html

    So to make sure it looks good on my gun, I edited in the parts on some Airsoft GI pictures:
    Before:

    After:

    So basically, that is what it'll look like, seems good.
    Reply With Quote Edit / Delete United States Show Events Winner Winner x 2 (list)

  34. Post #634
    not retarded or something
    Fenriswolf's Avatar
    July 2008
    6,111 Posts
    That's pretty rad man. I'm not sure if you will be able to use the pistol grip though.
    Reply With Quote Edit / Delete United States Show Events Agree Agree x 2 (list)

  35. Post #635
    Gold Member
    wombo's Avatar
    October 2008
    2,546 Posts
    That's pretty rad man. I'm not sure if you will be able to use the pistol grip though.
    I did another version without the pistol grip:
    Reply With Quote Edit / Delete United States Show Events

  36. Post #636
    child porn prodigy
    venom's Avatar
    April 2005
    15,115 Posts
    looks better imo
    Reply With Quote Edit / Delete Canada Show Events Agree Agree x 5 (list)

  37. Post #637
    Gold Member
    wombo's Avatar
    October 2008
    2,546 Posts
    Yes, no?

    Eh, we'll see, hopefully it fits.

    Automerge grr
    Reply With Quote Edit / Delete United States Show Events

  38. Post #638
    Identity's Avatar
    August 2009
    6,180 Posts
    Which vest?



    Or



    I'm really learning towards the first one, because the pouches are included. And both are the same price.
    Reply With Quote Edit / Delete United States Show Events

  39. Post #639
    I ROLL THE NICKELS
    CodeMonkey3's Avatar
    October 2008
    17,851 Posts
    Just bought a Replica Type 88 helmet and JGSDF cover.

    $60 total.
    Reply With Quote Edit / Delete United States Show Events Winner Winner x 2 (list)

  40. Post #640
    Taepodong-2's Avatar
    December 2009
    13,165 Posts
    I might get a Smersh instead of a 6Sh92-5 for my Russian loadout because there are sites that actually have it in stock and I can buy only the pouches I need instead of having a bunch of VOG-25 pouches and one mag pouch that's going to be empty. It actually comes out to slightly cheaper than the 6Sh92-5 if I just buy the belt, a mag pouch that holds 4 mags and two hand grenades and a butt pack.

    Edited:

    And maybe a PKM mag pouch to use as a utility pouch.
    Reply With Quote Edit / Delete Canada Show Events